destination-port (RPM and TWAMP)
Syntax
destination-port port;
Junos OS Hierarchy Levels
[edit services rpm bgp], [edit services rpm probe owner test test-name], [edit services rpm twamp client control-connection control-client-name] [edit services rpm twamp client control-connection control-client-name test-session test-session-name
Description
Specify the User Datagram Protocol (UDP) or Transmission Control Protocol (TCP) port to which a probe is sent. This statement is used only for TCP or UDP probe types.
The value for the destination-port can be only 7 when you configure
the destination port along with hardware timestamping. A constraint check prevents
you for configuring any other value for the destination port in this case.
This constraint does not apply when you are using one-way hardware timestamping
along with destination-port and either probe-type
udp-ping or probe-type udp-ping-timestamp.
For a managed TWAMP control connection (the default or configured with the
control-type managed statement), the
destination-port statement is required at the [edit
services rpm twamp control-connection
control-connection-name] hierarchy level (Junos OS)
or the [edit services monitoring twamp control-connection
control-connection-name] hierarchy level (Junos
OS Evolved) and is not allowed at the individual test-session level, at
[edit services rpm twamp control-connection
control-connection-name test-session
test-session-name] (Junos OS) or [edit
services monitoring twamp control-connection
control-connection-name test-session
test-session-name] (Junos OS Evolved).
For a TWAMP control connection configuration that includes the control-type
light statement, the destination-port statement is not
allowed at the [edit services rpm twamp control-connection
control-connection-name] hierarchy level (Junos
OS) or the [edit services monitoring twamp control-connection
control-connection-name] hierarchy level (Junos
OS Evolved), but is required for each test session, at [edit services rpm
twamp control-connection control-connection-name test-session
test-session-name] (Junos OS) or [edit
services monitoring twamp control-connection
control-connection-name test-session
test-session-name] (Junos OS Evolved).
Options
port—Port number 7 or from
862 through 65,535.
-
Default: The default value for the port is 862 to which the TWAMP client establishes the control connection.
The specified port numbers are recommended for RPM only.
Required Privilege Level
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Statement introduced in Junos OS Release 13.2 for PTX Series Packet Transport Routers.
Support at the [edit services rpm twamp client control-connection
control-client-name] hierarchy level introduced
in Junos OS Release 15.1 for MX Series routers.
Statement introduced in Junos OS Evolved Release 20.1R1.
Support at the [edit services rpm twamp client control-connection
control-client-name test-session
test-session-name] hierarchy level for Junos OS
Release 21.1R1.