fcoe-trusted
Syntax
fcoe-trusted;
Hierarchy Level
Original CLI
[edit ethernet-switching-options secure-access-port interface interface-name]
ELS CLI for Platforms that Support FCoE
[edit vlans vlan-name forwarding-options fip-security interface interface-name]
The fcoe-trusted configuration statement is
in a different hierarchy on the original CLI than on the Enhanced
Layer 2 Software (ELS) CLI.
QFX Series that Support FCoE-FC Gateway Configuration
[edit fc-fabrics fc-fabric-name protocols fip]
Description
Configure the specified 10-Gigabit Ethernet interface to trust Fibre Channel over Ethernet (FCoE) traffic. If an interface is connected to another switch such as an FCoE forwarder (FCF) or a transit switch, you can configure the interface as trusted so that the interface forwards FCoE traffic from the switch to the FCoE devices without installing FIP snooping filters.
(QFX Series FCoE-FC gateway) Configure the specified local Fibre
Channel fabric to trust FCoE traffic on all ports in the fabric. Changing
the fabric ports from untrusted to trusted removes any existing FIP
snooping filters from the ports. Changing the fabric ports from trusted
to untrusted by removing the fcoe-trusted configuration
from the fabric forces all of the FCoE sessions on those ports to
log out so that when the ENodes and VN_Ports log in again, the switch
can build the appropriate FIP snooping filters.
Required Privilege Level
routing—To view this statement in the configuration.routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 10.4.
Statement introduced for the FC fabric in Junos OS Release 11.3 for the QFX Series.
Statement introduced for the ELS CLI in Junos OS Release 13.2 for the QFX Series.