security-intelligence

date_range 19-Nov-23

arrow_backward

arrow_forward

Syntax

content_copy zoom_out_map
security-intelligence {
(add-source-ip-to-feed feed-name | add-destination-ip-to-feed feed-name)

Hierarchy Level

content_copy zoom_out_map
[edit security policies from-zone zone-name to-zone zone-name policy policy-name then permit application-services]
[edit security policies from-zone zone-name to-zone zone-name policy policy-name then deny application-services ]
[edit security policies from-zone zone-name to-zone zone-name policy policy-name then reject application-services]

Description

Starting in Junos OS Release 20.2R1, you can add source and destination addresses to the security intelligence (SecIntel) profiles to generate security feeds in a security policy by configuring the security-intelligence command. After the feeds are generated, you can configure other security policies to use the feeds as a dynamic-address to match designated traffic and perform policy actions.

Options

add-destination-ip-to-feed	Add the destination IP address to thesecurity feed.
add-source-ip-to-feed	Add the source IP address to the security feed.

The feed-name must be predefined and installed by SecIntel with the feed type and a specific ID.

Required Privilege Level

security—To view this statement in the configuration.

security-control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS Release 20.2R1.

arrow_backward PREVIOUS security-intelligence (Services)

NEXT arrow_forward security-intelligence (IDP)

Junos CLI Reference

ON THIS PAGE