routing-instance-list (TWAMP)
Syntax
routing-instance-list { instance-name { port number; } }
Hierarchy Level
[edit services rpm twamp server]
Description
Configure the Two-Way Active Measurement Protocol
(TWAMP) servers on specific routing instances, instead of associating
the TWAMP server at the system-level to apply to all routing instances
configured on a router. The default routing instance is Internet routing
table inet.0
. If you do not specify a routing instance,
the TWAMP probe applies to all routing instances. To apply the TWAMP
probe to only the default routing instance, you must explicitly set
the value of instance-name to default. If an interface is not part
of any routing instance, the default port is used for TWAMP probes.
You can configure up to 100 routing instances for a TWAMP server.
Options
instance-name
—Name of the routing instance, a maximum of 31 characters.
number
—Port number.
Range: 1 through 65,535
Required Privilege Level
system—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 15.1.