Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

show chassis craft-interface

Syntax

Syntax (MX Series Routers)

Description

For routers or switches that have a display on the craft interface, show the messages that are currently displayed. On all routers, you must enter this command on the primary Routing Engine.

Options

none

Show messages that are currently displayed on the craft interface.

all-members

(MX Series routers only) (Optional) Display information currently on the craft interface for all members of the Virtual Chassis configuration.

local

(MX Series routers only) (Optional) Display information currently on the craft interface for the local Virtual Chassis member.

member member-id

(MX Series routers only) (Optional) Display information currently on the craft interface for the specified member of the Virtual Chassis configuration. For an MX Series Virtual Chassis, replace member-id with a value of 0 or 1.

Required Privilege Level

view

Output Fields

Table 1 lists the output fields for the show chassis craft-interface command. Output fields are listed in the approximate order in which they appear.

Table 1: show chassis craft-interface Output Fields

Field Name

Field Description

LCD screenorFPM Display Contents

Contents of the Front Panel Module display:

  • router-name—Name of the router.

  • Up—How long the router has been operational, in days, hours, minutes, and seconds.

  • message—Information about the router traffic load, the power supply status, the fan status, and the temperature status. The display of this information changes every 2 seconds. If a text message has been created with the set chassis display command, this message appears on all four lines of the craft interface display. The display alternates between the text message and the standard system status messages every 2 seconds.

Front Panel System LEDs

(MX2010, MX2020, and MX2008 Routers) Status of the Front Panel System LEDs. A dot (.) indicates the LED is not lit. An asterisk (*) indicates the LED is lit.

Front Panel Alarm Indicators

(MX2010, MX2020, and MX2008 Routers) Status of the Front Panel Alarm indicators. A dot (.) indicates the relay is off. An asterisk (*) indicates the relay is active.

Input Relay

Status of the configured input relay ports—0 through 3. The mode is normally open or closed. The status is clear or raised.

Output Relay

Status of the configured output ports—0 or 1. The mode is normally open or closed. The status is clear or raised.

Front Panel FPC LEDs

(MX2010, MX2020, and MX2008 Routers) Status of the Front Panel Flexible PIC Concentrator (FPC) LEDs. A dot (.) indicates the LED is not lit. An asterisk (*) indicates the LED is lit. On MX2010 and MX2008 routers, there are 10 (0-9) FPCs LEDs. On MX2020 routers, there are 20 (0-9 and 10-19) FPCs LEDs.

CB LEDs

Status of the Control Board (CB) LEDs. A dot (.) indicates the LED is not lit. An asterisk (*) indicates the LED is lit.

PS LEDs

(MX2010, MX2020, and MX2008 Routers) Status of the Power Supply (PS) LEDs. A dot (.) indicates the LED is not lit. An asterisk (*) indicates the LED is lit. On MX2010 and MX2008 routers, there are 9 (0-8) PS LEDs. On MX2020 routers, there are 18 (0-8 and 9-17) PS LEDs.

FAN Tray LEDs

(MX2010, MX2020, and MX2008 Routers) Status of the Fan Tray LEDs. A dot (.) indicates the LED is not lit. An asterisk (*) indicates the LED is lit.

Front Panel SFB LEDs

(MX2010, MX2020, and MX2008 Routers) Status of the Front Panel Switch Fabric Boards (SFB) LEDs. A dot (.) indicates the LED is not lit. An asterisk (*) indicates the LED is lit.

Front Panel Chassis Info

(MX2010, MX2020, and MX2008 Routers) Information about the chassis such as the chassis number and role. User can set the chassis number in multi-chassis configurations.

SIB LEDs

Status of the Switch Interface Board (SIB) LEDs. A dot (.) indicates the LED is not lit. An asterisk (*) indicates the LED is lit.

Front Panel CB LEDs

(PTX Series Routers) Status of the Front Panel Control Board (CB) LEDs. A dot (.) indicates the LED is not lit. An asterisk (*) indicates the LED is lit.

Sample Output

show chassis craft-interface (MX Series Routers)

show chassis craft-interface (PTX Series Routers)

show chassis craft-interface (ACX7100)

show chassis craft-interface (ACX7100 Router)

show chassis craft-interface (ACX7024 Router)

Release Information

Command introduced before Junos OS Release 7.4.