Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

pic-mode

Syntax

Hierarchy Level

Description

Configure the operating mode for the specified port on the SFP+ uplink module on an EX3200 or EX4200 switch.

On a switch using the SFP+ or SFP+ MACSec uplink module, the pic-mode setting defines the speeds of the SFP+ interfaces. When the PIC mode is set to 10g on the SFP+ or SFP+ MACSec uplink module, uplink ports 0 and 2 support MACSec at 10-Gbps speeds while ports 1 and 3 cannot be used to send any traffic. When the PIC mode is set to 1g, all four SFP+ ports on the uplink module support MACSec at 1-Gbps speeds.

Options

mode—Operating mode of the SFP+ uplink module:

  • 1G—1-gigabit operating mode

  • 10G—10-gigabit operating mode

Required Privilege Level

interface—To view this statement in the configuration.interface-control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS Release 9.4.

Related Documentation