detect-loc
Syntax
detect-loc;
Hierarchy Level
[edit protocols oam ethernet connectivity-fault-management maintenance-domain md-name maintenance-association ma-name mep mep-id remote-mep mep-id ]
[edit protocols oam ethernet link-fault-management interface interface-name ]
Description
Specify whether Ethernet OAM continuity checks are performed for an individual remote maintenance end point (MEP).
When you configure the detect-loc statement at [edit protocols oam ethernet link-fault-management interface interface-name] hierarchy level, a loss-of-continuity
(LOC) defect is raised when the peer is not found within a period
that is equal to 3 times the current keepalive pdu interval. When
an LOC defect is raised, a syslog error message is generated .
When you configure the detect-loc statement
at the [edit protocols oam ethernet link-fault-management interface interface-name] hierarchy level, any action-profile configured to bring down the interface is executed when an LOC defect
is detected. However, the action-profile is not executed
if you have not configured detect-loc statement the detect-loc statement at the [edit protocols oam ethernet
link-fault-management interface interface-name] hierarchy level.
To view the current LOC status of an interface, execute the show oam ethernet link-fault-management command.
Default
The MEP does not generate LOC defect messages by default.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 14.2.