Syntax
vxlan-stitching {
control-word;
}
Hierarchy Level
[edit system packet-forwarding-options system-profile]
Description
You must configure vxlan-stitching on ACX devices to support Virtual
Extensible LAN (VXLAN) data center interconnect (DCI) stitching features.
Note:
The PFE will restart once this statement is applied.
Options
| control-word |
Enable this option on an ACX device operating as a DCI gateway (GW) when both
of the following are true:
-
Your MPLS network is using Ethernet VPN (EVPN-MPLS) for the fabric.
-
Your ACX DCI GW's peer device is using control-word. For
example, you may be connecting across the DCI to a PTX, which only
supports
control-word.
Consider the following when configuring control-word support.
-
On ACX devices, control-word support is disabled by default under the
edit system packet-forwarding-options system-profile
vxlan-stitching hierarchy. Only enable this option when
control-word support is required.
-
In MAC-VRF routing-instances, control-word support is enabled by default
under the edit routing-instances instance-name
protocols evpn hierarchy.
-
In EVPN-VXLAN to EVPN-MPLS networks, when the peer GW doesn't
support control-word, configure the vxlan-stitching knob
as described, and configure the no-control-word option
in the [edit routing-instances instance-name
protocols evpn] hierarchy.
-
In EVPN-VXLAN to EVPN-MPLS networks, when the peer GW does support
control-word, configure the control-word option in the
[edit system packet-forwarding-options system-profile
vxlan-stitching hierarchy.
|
Default
Stitching features are disabled.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Evolved Release 23.2R1.
control-word option introduced in Junos OS Evolved Release 23.4R1.
