protocol (Flow Descriptions)
Syntax
protocol number;
Hierarchy Level
[edit unified-edge pcef flow-description flow-identifier], [edit services pcef flow-description flow-identifier]
Description
Specify a protocol type to identify the subscriber
traffic that you want the service data flow (SDF) filter to detect.
If you specify the protocol statement, you must specify
a protocol number.
If you are using Junos OS Subscriber Aware, specify the protocol
type at the [edit unified-edge pcef flow-description flow-identifier] hierarchy level.
If
you are using Junos OS Broadband Subscriber Management, specify the
protocol type at the [edit services pcef flow-description flow-identifier] hierarchy level.
Default
If you do not specify the protocol statement,
the default is any protocol.
Options
| number | Number that specifies the IP protocol type. |
Range: 1 through 255
Required Privilege Level
For Junos OS Subscriber Aware:
unified-edge—To view this statement in the configuration.
unified-edge-control—To add this statement to the configuration.
For Junos OS Broadband Subscriber Management:
services—To view this statement in the configuration.
services–control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 17.1.
Support at the [edit services pcef flow-description flow-identifier] hierarchy level introduced for
Junos OS Broadband Subscriber Management in Junos OS Release 17.2
on MX Series.