request security user-identification local-authorization-table add
Syntax
request security user-identification local-authorization-table add user user-name ip-address ip-address roles [role-name]
Description
This command adds user and role information to the local authentication table. The table is used to retrieve user and role information for traffic from the specified IP address to enforce a user role firewall.
To add an entry, specify the user name, IP address, and up to 40 roles to be associated with this user. Subsequent commands for the same user and IP address aggregates any new roles to the existing list. An authentication entry can contain up to 200 roles.
To change the user name of an entry or to remove or change entries in a role list, you must delete the existing entry and create a new one.
An IP address can be associated with only one user. If a second request is made to add a different user using the same IP address, the second authentication entry overwrites the existing entry.
Options
user user-name—Specify the name of the user to be added to the table.
ip-address ip-address—Specify the IP address of the user. Either IPv4 or IPv6 addresses are supported.
roles [role-name]—(Optional) Specify the role or list of roles to be associated with the specified user. If the specified user and IP address already exist, any roles specified in the command are added to the existing role list.
Required Privilege Level
maintenance
Output Fields
When you enter this command, either an entry is added to the local authentication table, or the roles of an existing entry are aggregated with additional roles.
Sample Output
request security user-identification local-authentication-table add
user@host> request security user-identification local-authentication-table add user user1 ip-address 192.0.2.1 roles role1 user@host> request security user-identification local-authentication-table add user user2 ip-address 203.0.113.2 roles [role2 role3] user@host> request security user-identification local-authentication-table add user user2 ip-address 203.0.113.2 roles role1 user@host> show security user-identification local-authentication-table all Total entries: 2 Source IP Username Roles 192.0.2.1 user1 role1 203.0.113.2 user2 role2, role3, role1
Release Information
Command introduced in Junos OS Release 12.1. Command updated in Junos OS Release 12.1X44-D10.