request fabric administration power-off interconnect-device
Syntax
request fabric administration power-off interconnect--device (serial-id | alias-name)
Description
In QFX3000-G QFabric systems, you can use this command to power off QFX3008-I Interconnect devices.
This command systematically takes the device offline and gracefully shuts down the device while preserving system state information. A message appears on the console or console log, confirming that the operating system has stopped on the device.
Options
| serial-id | alias-name | Provide the serial ID or alias name of the device. |
Additional Information
Required Privilege Level
maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request fabric administration power-off interconnect-device
user@qfabric request fabric administration power-off interconnect-device IC-12345 STEP 1 of 7 (Acquiring lock): Acquiring lock to perform this operation Acquired lock to perform this operation STEP 2 of 7 (Performing pre-checks): interconnect-device IC-12345 is online STEP 3 of 7 (Gracefully offlining the interconnect): Disabling fabric protocol on interconnect-device Disabled fabric protocol on interconnect-device STEP 4 of 7 (Waiting for convergence): Waiting for convergence(this will take few minutes) Convergence complete STEP 5 of 7 (Powering-off the interconnect): Now, powering-off the interconnect-device (this may take some time) Powered-off the interconnect-device STEP 6 of 7 (Updating inventory): Removing the interconnect-device - IC-A0004 from inventory interconnect-device - IC-12345 is removed from inventory STEP 7 of 7 (Releasing lock): Releasing the lock
Release Information
Command introduced in Junos OS Release 14.1X53-D15.