show route pfe-install-error
Syntax
show route pfe-install-error
Description
(Junos OS Evolved only)
When the forwarding plane is not forwarding traffic, use this command to see if the Packet
Forwarding Engine has sent an error for the route that is dropping traffic. You must first
configure the pfe-install-error statement at the [edit
routing-options forwarding-table] hierarchy level and restart the rpd process to
enable this error reporting.
Options
Additional Information
These errors are also
displayed as part of the show route extensive
command:
user@host> show route any-route-prefix extensive
inet.0: 11 destinations, 14 routes (11 active, 0 holddown, 0 hidden)
10.54.18.6/32 (1 entry, 1 announced)
TSI:
KRT in-kernel <>/32 -> {….}
*BGP Preference: 170/-101
Route Error State: YES Last error received: 20XX-XX-XX XX:XX:XX
Next hop type: Router, Next hop index: 10001
Required Privilege Level
view
Output Fields
|
Field Name |
Field Description |
|---|---|
|
Error category |
There are two categories:
|
|
Handle |
Address of the object. |
|
Route |
IP address of the route. |
|
Time |
Time when error occurred. |
|
Type |
Error type is 0x1. |
Sample Output
show route pfe-install-error
user@host> show route pfe-install-error
Route Error category Handle Type Time 10.31.1.4 PFE 0x5594bd5523c0 0x1 20XX-XX-XX XX:XX:XX 10.31.1.1 PFE 0x5594bd552328 0x1 20XX-XX-XX XX:XX:XX
Release Information
Command introduced in Junos OS Evolved Release 24.4R1.