request fabric administration power-off interconnect-device fpc
Syntax
request fabric administration power-off interconnect--device (serial-id | alias-name) fpc slot-number
Description
In QFX3000-G QFabric systems, you can use this command to power off a 16-Port QSFP+ front card in a QFX3008-I Interconnect device.
A message appears on the console or console log, confirming that the operating system has stopped on the device.
Options
| serial-id | alias-name | Provide the serial ID or alias name of the QFX3008-I Interconnect device. |
| slot slot-number | Provide the slot number of the 16-Port QSFP+ front card in the QFX3008-I Interconnect device. The range of slot numbers is 0 through 15 |
Additional Information
Required Privilege Level
maintenance
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request fabric administration power-off interconnect-device fpc 13
user@qfabric request fabric administration power-off interconnect-device IC-12345 fpc 13 STEP 1 of 6 (Acquiring lock): Acquiring lock to perform this operation Acquired lock to perform this operation STEP 2 of 6 (Performing pre-checks): interconnect-device IC-12345 is online STEP 3 of 6 (Gracefully offlining the interconnect linecard): Gracefully offlining the fpc fpc is successfully offlined STEP 4 of 6 (Waiting for convergence): Waiting for convergence(this will take few minutes) request fabric administration power-off interconnect-device IC-12345 Convergence complete STEP 5 of 6 (Powering-off the interconnect linecard): Now, powering-off the fpc on the interconnect-device Powered-off the fpc on the interconnect-device STEP 6 of 6 (Releasing lock): Releasing the lock
Release Information
Command introduced in Junos OS Release 14.1X53-D15.