network-option
Syntax
network-option (option-1 | option-2);
Hierarchy Level
[edit chassis synchronization]
Description
Configure the Ethernet equipment clock (EEC) synchronization networking type.
For SCB, this option is set with the set chassis
synchronization network-type (option-1 | option-2) configuration
command at the [edit] hierarchy level.
For Junos OS releases 11.2R4 through 13.3R3 for MX240,
MX480, and MX960 with SCB, SCBE, and SCBE2; and MX2010 and MX2020
with SCB or SCBE; you must execute the following commands after you
change the network option at the [edit chassis synchronization] hierarchy level. This is because the loop bandwidth does not change
automatically when you change the network option.
user@host# deactivate chassis synchronization user@host# activate chassis synchronization
Options
Depending on the configuration of the Synchronization Status Messages (SSM) quality level, the network option functions in the following ways:
option-1—Maps to the G.813 option 1 (EEC1).option-2—Maps to the G.812 type IV clock (EEC1).
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 11.2R4.