request chassis system-mode
Syntax
request chassis system-mode <mode-2x100G> <default-mode>
Description
Set the operating mode of the ports to 100-Gigabit
Ethernet mode on an EX4300-48MP switch. The request chassis system-mode command sets the ports to 100-Gigabit Ethernet mode by overriding
the set chassis fpc fpc-slot pic pic-slot port port-number speed speed value command. This command restarts the DC
packet forwarding engine (DCPFE), disables the virtual chassis ports
(VCP) and brings up both ports of the uplink module to operate at
100Gbps speed. Use the show chassis system-mode command
to verify configured system mode and the request chassis system-mode
default-mode command to return to the default operating mode.
Options
mode-2x100G |
PIC mode configuration is 2x100Gbps. This will restart PFE and disable VCP ports. |
default-mode |
Default-mode is the oversubscribed mode. This will restart PFE. |
Required Privilege Level
view
Sample Output
request chassis system-mode
user@switch> request chassis system-mode mode-2x100G (mode - 2x100G on EX4300-48MP) System-mode has changed. This will restart PFE and disable VCP ports.
request chassis system-mode (EX4300-48MP)
user@switch> request chassis system-mode default-mode System-mode has changed. This will restart PFE.
Release Information
Command introduced in Junos OS Release 19.3R1.