interface-group (Routing Options)
Syntax
interface-group group-id exclude;
Hierarchy Level
[edit routing-options flow]
Description
Exclude applying flowspec filter to traffic received on specific interfaces. Use exclude to specify the interface group where you do not want to receive the traffic.
Do not use this statement with BGP flowspec on the QFX10K
or Junos
based PTX platforms as this might result in erratic behavior.
Junos OS does not support the usage of interface-group along
with BGP flowspec on the QFX10000 Series. Therefore, we do not recommend the use
of this statement on these
platforms.
For details on supported platforms and Junos releases see Feature Explorer.
Note that when you specify exclude groups on Junos based PTX platforms, it is applied to the entire interface or port. Therefore, you cannot configure different filter groups on different logical interfaces. The exclude group is applicable to all families and are exempt from flowspec filtering irrespective to which family you configure this option. Also ensure that you configure the same group here and at [edit inet family] hierarchy level. It does not matter under which family you add the group, either way flows from both families are allowed.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 16.1.