packet-burst (Hierarchical Policer)
Syntax
packet-burst packets;
Hierarchy Level
[edit dynamic-profiles profile-name firewall hierarchical-policer hierarchical-policer-name aggregate if-exceeding-pps], [edit dynamic-profiles profile-name firewall hierarchical-policer hierarchical-policer-name premium if-exceeding-pps], [edit [OBSOLETE] firewall hierarchical-policer hierarchical-policer-name aggregate if-exceeding-pps], [edit [OBSOLETE] firewall hierarchical-policer hierarchical-policer-name premium if-exceeding-pps]
Description
On MPCs hosted on MX Series routers, configure the packet burst limit for premium or aggregate traffic in a hierarchical policer. When used in combination with the if-exceeding-ppsand pps-limit statements, you can control the number of packets that will be allowed over a configured packets-per-second limit when traffic is in burst state.
Options
packets—Packet
burst limit in packets. You can specify the number of packets either
as a decimal number or as a decimal number followed by the abbreviation k (1000), or m (1000000).
Range: 1 through 24414062
Required Privilege Level
firewall—To view this statement in the configuration.firewall-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 16.1.