network-services
Syntax
network-services (ethernet | enhanced-ethernet | ip | enhanced-ip | lan);
Hierarchy Level
[edit chassis]
Description
Set the router’s network services to a specific mode of operation. On
MX240, MX480, and MX960 routers, MPC5E and MPC7E power on only if
the network services mode configured is enhanced-ip
or enhanced-ethernet.
MX2010 and MX2020 support only enhanced-ip and
enhanced-ethernet network services
modes.
Default
MX80, MX104, MX2010, MX2020—
enhanced-ipMX240, MX480, MX960—
ip
Options
ethernet—Set the router’s
network services to Ethernet and use standard, compiled firewall filter
format.
enhanced-ethernet—Set the router’s network
services to enhanced Ethernet and use enhanced mode capabilities.
Only MPCs and MS-DPCs are powered on in the chassis.
ip—Set the router’s network services
to Internet Protocol and use standard, compiled firewall filter format.
enhanced-ip—Set the router’s network services to enhanced Internet Protocol and
use enhanced mode capabilities. Only MPCs and MS-DPCs are powered on in the chassis.
Non-service DPCs do not work with enhanced network services mode options. This
feature is enabled by default on MX80, MX104, MX2010, and MX2020 Universal Routing
Platforms.
For
MX960 platform, enhanced-ip configuration must be enabled on both
REs together. After committing the configuration, GRES configuration must be
disabled and both REs must be rebooted to ensure that all the FPCs reboot and have
the same network-services as REs. Any mismatch in network services between RE0, RE1,
FPCs will lead to unexpected results.
lan—Set the router’s network services
to LAN and use standard, compiled firewall filter format. Reboot the
system after setting the router’s network services to LAN.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 8.5.
enhanced-ethernet and enhanced-ip options
introduced in Junos OS Release 11.4.
limited-ifl-scaling option introduced in Junos OS Release 15.1R3
for MX Series routers.