remote-ports
Syntax
remote-ports [number];
Hierarchy Level
[edit unified-edge pcef flow-description flow-identifier], [edit services pcef flow-description flow-identifier]
Description
Specify a remote port or list of remote ports to identify the subscriber traffic that you want the service data flow (SDF) filter to detect.
If you are using Junos OS Subscriber Aware, specify the remote
ports at the [edit unified-edge pcef flow-descriptions flow-identifier] hierarchy level.
If
you are using Junos OS Broadband Subscriber Management, specify the
remote ports at the [edit services pcef flow-descriptions flow-identifier] hierarchy level.
You can specify either a list of remote ports or a remote port range, but not both.
Default
If you configure neither the remote-ports nor the remote-port-range statement, the default is any
remote port.
Options
| number | Port number or list of port numbers. You can specify a maximum of three port numbers in a list.
|
Required Privilege Level
For Junos OS Subscriber Aware:
unified-edge—To view this statement in the configuration.
unified-edge-control—To add this statement to the configuration.
For Junos OS Broadband Subscriber Management:
services—To view this statement in the configuration.
services–control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 17.1.
Support at the [edit services pcef flow-descriptions flow-identifier] hierarchy level introduced for
Junos OS Broadband Subscriber Management in Junos OS Release 17.2
on MX Series.