Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

show route label

Syntax

Syntax (EX Series Switches)

Description

Display the routes based on a specified Multiprotocol Label Switching (MPLS) label value.

Options

label

Value of the MPLS label.

brief | detail | extensive | terse

(Optional) Display the specified level of output. If you do not specify a level of output, the system defaults to brief.

logical-system (all | logical-system-name)

(Optional) Perform this operation on all logical systems or on a particular logical system.

Required Privilege Level

view

Output Fields

For information about output fields, see the output field table for the show route command, the show route detail command, the show route extensive command, or the show route terse command.

Sample Output

show route label terse

show route label

show route label detail

show route label detail (Multipoint LDP Inband Signaling for Point-to-Multipoint LSPs)

show route label detail (Multipoint LDP Inband Signaling for Point-to-Multipoint LSPs)

show route label detail (Multipoint LDP with Multicast-Only Fast Reroute)

show route label detail (Dynamic List Next Hop)

The output for show route label detail shows the two indirect next hop for an ESI.

show route label extensive

The output for the show route label extensive command is identical to that of the show route label detail command. For sample output, see show route label detail.

Release Information

Command introduced before Junos OS Release 7.4.