ethernet-policer-profile
Syntax
ethernet-policer-profile {
input-priority-map {
ieee802.1p premium [ values ];
}
output-priority-map {
classifier {
premium {
forwarding-class class-name {
loss-priority (high | low);
}
}
}
}
policer cos-policer-name {
aggregate {
bandwidth-limit bps;
burst-size-limit bytes;
}
premium {
bandwidth-limit bps;
burst-size-limit bytes;
}
}
}
Hierarchy Level
[edit interfaces interface-name gigether-options ethernet-switch-profile], [edit interfaces interface-name aggregated-ether-options ethernet-switch-profile]
Description
On QFX Series standalone switches, this statement hierarchy is only supported on the Enhanced Layer 2 Switching CLI.
For Gigabit Ethernet IQ, 10-Gigabit Ethernet, Gigabit Ethernet
PICs with SFPs (except the 10-port Gigabit Ethernet PIC and the built-in
Gigabit Ethernet port on the M7i router), and 100-Gigabit Ethernet
Type 5 PIC with CFP, configure a class of service (CoS)-based policer.
Policing applies to the inner VLAN identifiers, not to the outer tag.
For Gigabit Ethernet interfaces with SFPs (except the 10-port Gigabit
Ethernet PIC and the built-in Gigabit Ethernet port on the M7i router),
the premium policer is not supported.
The remaining statements are explained separately. See CLI Explorer.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 7.4.