show system anomalies (GNF)

Syntax

show system anomalies (all-anomalies | config | fru | system)

Description

Display the incompatibilities between the software version running on the guest network function (GNF) and the version running on the base system (BSYS).

Options

all-anomalies	Display the multiversion software incompatibilities from all categories—system, configuration, and FRU.
config	Display the feature incompatibilities between software versions.
fru	Display the FRU-level incompatibilities between software versions. This can be an incompatibility pertaining to the support for a specific FRU.
system	Display the system-level incompatibilities between software versions. These include interprocess communication (IPC) message, CLI, or SNMP incompatibility.

Required Privilege Level

View

Output Fields

Table 1 lists the output fields for the show system anomalies command. Output fields are listed in the approximate order in which they appear.

Table 1: show system anomalies gnf-id Output Fields
Field Name	Field Description
`Anomaly Type`	Shows the software incompatibility type. The following are the possible values: SYS—Indicates system-specific incompatibilities. FRU—Indicates FRU-specific incompatibilities. CONFIG—Indicates feature-specific incompatibilities.
`Anomaly ID`	Shows the incompatibility ID.
`Default Action`	Shows the default actions associated with incompatibilities. The following are the possible values: WARN—Indicates the presence of a minor incompatibility. It causes a warning. ABORT—Indicates the presence of a major incompatibility. It causes a termination action.
`Class`	Indicates of the incompatibility is present in GNF, or BSYS, or both.
`Message`	Incompatibility description.
`FRU ID`	Field-replaceable unit (FRU) ID. Applicable in the case of FRU-specific incompatibilities.
Firmware	Firmware of the FRU.

Sample Output

command-name

Release Information

Command introduced in Junos OS Release 17.4R1.

ON THIS PAGE