static-multihoming-peer

Syntax

Hierarchy Level

Description

Statically identify a device's multihoming peer leaf devices in an Ethernet VPN (EVPN) network running enhanced optimized intersubnet multicast (OISM).

OISM leaf devices are multihoming peers when they share an Ethernet segment (ES) for a multihomed customer edge (CE) device or attached host. When enhanced OISM leaf devices have static information about their multihoming peers, the multihoming peer leaf devices can avoid multicast traffic loss when their peer devices go up and down.

We support this statement with OISM in enhanced OISM mode only.

Note:

In Junos OS Release 24.2R1, this statement was named multihoming-peer-gateways to support multiple multihoming feature use cases.

Starting in Junos OS and Junos OS Evolved Release 24.4R1, instead we provide this static-multihoming-peer statement for OISM multihoming peer leaf devices. You won't see the multihoming-peer-gateways statement in the Junos OS CLI anymore.

Options

(static-multihoming-peer-IP-address | [ static-multihoming-peer-IP-address ... ])—One or more multihoming peer device loopback IPv4 addresses. Specify a single address, or list multiple peer device addresses within square brackets.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS and Junos OS Evolved Release 24.4R1.