ppp-options (L2TP)
Syntax
ppp-options {
aaa-options aaa-options-name;
chap;
ignore-magic-number-mismatch;
initiate-ncp (ip | ipv6 | dual-stack-passive)
ipcp-suggest-dns-option;
mru;
mtu;
pap;
peer-ip-address-optional;
}
Hierarchy Level
[edit access group-profile profile-name ppp]
Description
Configure PPP-specific properties in a group profile that applies to tunneled PPP subscribers at the LNS.
The remaining statements are explained separately. Search for a statement in CLI Explorer or click a linked statement in the Syntax section for details.
PPP options can also be configured for an inline service
interface within a dynamic profile with the ppp-options (Dynamic PPP) statement.
The following behavior determines the interaction between the PPP
options configured in a group profile and the PPP options configured
in a dynamic profile:
When PPP options are configured only in the group profile, the group profile options are applied to the subscriber.
When PPP options are configured in both the dynamic profile and the group profile, the group profile options are applied to the subscriber only when the dynamic profile PPP options do not include any of the following attributes: aaa-options, chap, ipcp-suggest-dns-option, mru, mtu, pap, and peer-ip-address-optional. When any of these attributes is present, the dynamic profile is applied to the subscriber.
When PPP options are configured in both a group profile and a dynamic profile, the dynamic profile configuration takes complete precedence over the group profile when the dynamic profile includes one or more of the PPP options that can be configured in the group profile. Complete precedence means that there is no merging of options between the profiles. The group profile is applied to the subscriber only when the dynamic profile does not include any PPP option available in the group profile.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 11.4.
mtu statement introduced in Junos OS Release 14.2