show protection-group ethernet-ring aps
Syntax
show protection-group ethernet-ring aps
Description
Display the status of the Automatic Protection Switching (APS) and Ring APS (RAPS) messages on an Ethernet ring.
Options
This command has no options.
Required Privilege Level
view
Output Fields
Table 1 lists the output fields for the show protection-group
ethernet-ring aps command. Output fields are listed in the approximate
order in which they appear.
Field Name |
Field Description |
|---|---|
Ethernet Ring |
Name configured for the Ethernet ring. |
Request/State |
Status of the Ethernet ring RAPS messages.
Note:
Both |
Ring Protection Link Blocked |
Blocking on the ring protection link: Yes or No. |
No Flush |
Indicates the value of the Do Not Flush (DNF) flag in the received RAPS PDU. If the value is Yes, then FDB flush is not triggered as part of processing of the received RAPS PDU. |
|
This parameter is the reference to the blocked ring port. If the east ring port is blocked, the Blocked Port Reference (BPR) value is 0. If the west ring port is blocked, the BPR value is 1. If both ring ports are blocked, this parameter can take any value. If both east and west ports are blocked or not blocked, the value would be 0. This field is valid only when G.8032v2 is supported. |
Blocked Port Reference |
Reference of the ring port on which traffic is blocked. |
Originator |
Indicates whether the node is the originator of the RAPS messages. |
Remote Node ID |
Identifier (in MAC address format) of the remote node. |
Sample Output
show protection-group ethernet-ring aps (EX Switches)
user@switch>show protection-group ethernet-ring aps
Ring Name Request/state No Flush RPL Blocked Originator Remote Node ID erp1 NR No Yes No 00:1F:12:30:B8:81Sample Output
show protection-group ethernet-ring aps (Owner Node, Normal Operation on ACX and MX Routers)
user@host> show protection-group ethernet-ring aps Ethernet Ring Request/state RPL Blocked No Flush BPR Originator Remote Node ID Erp_1 NR Yes No 1 No 00:00:00:02:00:01
Sample Output
- show protection-group ethernet-ring aps detail (Owner Node, Normal Operation on ACX and MX Routers)
- show protection-group ethernet-ring aps (MX RPL Owner Ring Node, Failure condition on non-RPL link of the ring)
- show protection-group ethernet-ring aps (MX Interconnection Ring Node, Failure condition in major ring on non-RPL link of the ring)
- show protection-group ethernet-ring aps (MX Series router)
- show protection-group ethernet-ring aps detail (MX Series router)
- show protection-group ethernet-ring aps (MX Interconnection Ring Node as RPL owner of major ring, rings in IDLE state)
- show protection-group ethernet-ring aps detail (EX2300 and EX3400 Switches)
show protection-group ethernet-ring aps detail (Owner Node, Normal Operation on ACX and MX Routers)
user@host> show protection-group ethernet-ring aps detail Ethernet-Ring name : Erp_1 Request/State : NR Ring Protection Link blocked : Yes No Flush Flag : No Blocked Port Reference : 1 Originator : No Remote Node ID : 00:00:00:02:00:01
show protection-group ethernet-ring aps (MX RPL Owner Ring Node, Failure condition on non-RPL link of the ring)
user@host>show protection-group ethernet-ring aps
Ethernet Ring Request/state RPL Blocked No Flush
pg101 SF No No
Originator Remote Node ID
No 00:01:02:00:00:01 show protection-group ethernet-ring aps (MX Interconnection Ring Node, Failure condition in major ring on non-RPL link of the ring)
user@host>show protection-group ethernet-ring aps
Ethernet Ring Request/state RPL Blocked No Flush BPR
pg_major SF No No 0
pg_subring NR Yes Yes 0
Originator Remote Node ID
No 00:01:00:00:00:01
No 00:02:00:00:00:02show protection-group ethernet-ring aps (MX Series router)
user@host>show protection-group ethernet-ring aps
Ethernet Ring Request/state RPL Blocked No Flush BPR Originator Remote Node ID
Inst_Vlans_1-15 NR Yes Yes 1 Yes NA
Inst_Vlans_16-30 NR Yes Yes 0 No 00:00:00:03:00:02 show protection-group ethernet-ring aps detail (MX Series router)
user@host>show protection-group ethernet-ring aps
Ethernet-Ring name : Inst_Vlans_1-15
Request/State : NR
Ring Protection Link blocked : Yes
No Flush Flag : Yes
Blocked Port Reference : 1
Originator : Yes
Remote Node ID : NA
Ethernet-Ring name : Inst_Vlans_16-30
Request/State : NR
Ring Protection Link blocked : Yes
No Flush Flag : Yes
Blocked Port Reference : 0
Originator : No
Remote Node ID : 00:00:00:03:00:02show protection-group ethernet-ring aps (MX Interconnection Ring Node as RPL owner of major ring, rings in IDLE state)
user@host>show protection-group ethernet-ring aps detail
Ethernet-Ring name : pg_major
Request/State : NR
Ring Protection Link blocked : Yes
No Flush Flag : Yes
Blocked Port Reference : 0
Originator : Yes
Remote Node ID : NA
Ethernet-Ring name : pg_subring
Request/State : NR
Ring Protection Link blocked : Yes
No Flush Flag : Yes
Blocked Port Reference : 0
Originator : No
Remote Node ID : 00:00:03:00:00:03
show protection-group ethernet-ring aps detail (EX2300 and EX3400 Switches)
user@switch>show protection-group ethernet-ring aps detail
Ethernet-Ring name : pg1001
Request/State : NR
Ring Protection Link blocked : Yes
No Flush Flag : Yes
Blocked Port Reference : 0
Originator : Yes
Remote Node ID : NARelease Information
Command introduced in Junos OS Release 9.4.
Command introduced in Junos OS Release 18.1 for EX2300 and EX3400 switches.