request modem wireless sim-lock
Syntax
request modem wireless sim-lock enable interface-name pin pin
Description
Lock the Subscriber Identity Module (SIM) on the
Mini-PIM. The SIM lock does not take effect until the next reboot
of the services gateway. You can verify the locked mode using the show modem wireless firmware command.
If there are two SIMs installed on the LTE Mini-PIM, then only the active SIM is locked. After the SIM is locked, it cannot connect to the network. The SIM must be unlocked before it is used to connect to the network.
Options
interface-name—The LTE Mini-PIM is denoted as cl-x/0/0, where x is the slot number in which the LTE Mini-PIM is installed.pin pin—Four-digit personal identification number (PIN). Obtain the PIN from the service provider.Note:If the PIN is entered incorrectly three consecutive times, the SIM card is blocked. Obtain a PIN unblocking key (PUK) from the service provider.
Required Privilege Level
maintenance
Sample Output
request modem wireless sim-lock
user@host> request modem wireless sim-lock enable cl-1/0/0 pin 4321 Issued SIM 2 lock state request successfully. Please use 'show modem wireless firmware' to check SIM status
Release Information
Command introduced in Junos OS Release 9.5.