close

keyboard_arrow_left

Table of Contents Expand all

list Table of Contents

English

mvpn-iana-rt-import

date_range 20-Nov-23

arrow_backward

arrow_forward

Syntax

content_copy zoom_out_map
mvpn-iana-rt-import;

Hierarchy Level

content_copy zoom_out_map
[edit logical-systems logical-system-name protocols bgp group group-name],
[edit protocols bgp group group-name]

Description

Enables the use of IANA assigned rt-import type values (0x010b) for mutlicast VPNs. You can configure this statement on ingress PE routers only.

Note:

If you configure the mvpn-iana-rt-import statement in Junos OS release 10.4R2 and later, the Juniper Networks router can inter-operate with other vendors routers for multicast VPNs. However, the Juniper Networks router cannot inter-operate with Juniper Networks routers running Junos OS release 10.4R1 and earlier.

If you do not configure the mvpn-iana-rt-import statement in Junos OS release 10.4R2 and later, the Juniper Networks router cannot inter-operate with other vendors routers for multicast VPNs. However, the Juniper Networks router can inter-operate with Juniper Networks routers running Junos OS release 10.4R1 and earlier.

Default

The default rt-import type value is 0x010a.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS release 10.4R2.

Statement deprecated in Junos OS release 17.3, which means it no longer appears in the CLI but can be accessed by scripts or by typing the command name until it is finally removed.

arrow_backward PREVIOUS mvpn (Draft-Rosen MVPN)

NEXT arrow_forward mvpn-mode

Junos CLI Reference

ON THIS PAGE