show ethernet-switching layer2-protocol-tunneling interface
Syntax
show ethernet-switching-layer2-protocol-tunneling interface <interface-name>
Description
Display information about Layer 2 protocol tunneling (L2PT) on interfaces that have been configured for L2PT.
Options
| none | Display L2PT information about all interfaces on which L2PT is enabled. |
| interface-name | (Optional) Display L2PT information for the specified interface. |
Required Privilege Level
view
Output Fields
Table 1 lists
the output fields for the show ethernet-switching layer2-protocol-tunneling
interface command. Output fields are listed in the approximate
order in which they appear.
Field Name |
Field Description |
|---|---|
Interface |
Name of an interface on the switch. |
Operation |
Type of operation being performed on the interface. Values are Encapsulation and Decapsulation. |
State |
State of the interface. Values are active and shutdown. |
Description |
If the interface state is shutdown, displays why the interface is shut down. If the description says Loop detected, it means that the interface is an access interface that has received L2PT-enabled PDUs. Access interfaces should not receive L2PT-enabled PDUs. This scenario might mean that there is a loop in the network. |
Sample Output
- show ethernet-switching layer2-protocol-tunneling interface
- show ethernet-switching layer2-protocol-tunneling interface xe-0/0/0.0
show ethernet-switching layer2-protocol-tunneling interface
user@switch> show ethernet-switching layer2-protocol-tunneling interface Layer2 Protocol Tunneling information: Interface Operation State Description xe-0/0/0.0 Encapsulation Shutdown Shutdown threshold exceeded xe-0/0/1.0 Decapsulation Shutdown Loop detected xe-0/0/2.0 Decapsulation Active
show ethernet-switching layer2-protocol-tunneling interface xe-0/0/0.0
user@switch> show ethernet-switching layer2-protocol-tunneling interface xe-0/0/0.0 Layer2 Protocol Tunneling information: Interface Operation State Description xe-0/0/0.0 Encapsulation Shutdown Shutdown threshold exceeded
Release Information
Command introduced in Junos OS Release 10.0.