disable-notification-flag (BGP Graceful Restart)
Syntax
disable-notification-flag {
omit-no-export;
}
Hierarchy Level
[edit logical-systems logical-system-name protocols bgp graceful-restart], [edit logical-systems logical-system-name protocols bgp group group-name graceful-restart], [edit logical-systems logical-system-name protocols bgp group group-name neighbor address graceful-restart], [edit logical-systems logical-system-name routing-instances instance-name protocols bgp graceful-restart], [edit logical-systems logical-system-name routing-instances instance-name protocols bgp group group-name graceful-restart], [edit logical-systems logical-system-name routing-instances instance-name protocols bgp group group-name neighbor address graceful-restart], [edit protocols bgp graceful-restart], [edit protocols bgp group group-name graceful-restart], [edit protocols bgp group group-name neighbor address graceful-restart]
Description
Disables the transmission of the notification (N)
flag in the graceful restart capability negotiation. The BGP protocol
sends a notification NOTIFICATION message and reset the peering
session to handle the error condition. BGP graceful restart that permits
the operational procedures to be performed when the BGP speaker receives
a notification message. This behavior permits the BGP speaker to
avoid flapping reachability and continue forwarding while the BGP
speaker restarts the session to handle errors detected in the BGP
protocol. You can define this setting at the [edit protocols
bgp graceful-restart], [edit protocols bgp group group-name graceful-restart], or [edit protocols
bgp group group-name neighbor neighbor-address graceful-restart] hierarchy level.
Disables the transmission of the N flag in the graceful restart capability negotiation, but in addition, it disables the new rules for invoking graceful restart receiver mode as specified in the IETF bgp-gr-notification draft, and disables the transmission of the Hard Reset subcode. The Hard Reset subcode is continued to be observed when received in a Notify or a Cease message.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 15.1.