show network-access s6a
Syntax
show network-access s6a<state><statistics><statistics extensive>
Description
Displays information about the s6a protocol exchanges that are used to authenticate subscribers when subscribers log in.
Options
state |
Displays the state of information about authentication. |
statistics |
Displays information about all s6a general counters. |
statistics extensive |
Displays detail information about all s6a general counters. |
Required Privilege Level
view
Sample Output
- show network-access s6a state
- show network-access s6a statistics
- show network-access s6a statistics extensive
show network-access s6a state
user@host> show network-access s6a state S6a state: Component Value active-configuration yes queue-state normal request-count 0
show network-access s6a statistics
user@host> show network-access s6a statistics S6a general counters: Counter ............Value aia-grant ..........1
show network-access s6a statistics extensive
user@host# show network-access s6a statistics extensive S6a general counters: Counter Value air 0 air-retry 0 air-failures 0 aia 0 aia-grant 0 aia-deny 0 aia-timeout 0 aia-failure 0 aia-late-response 0 aia-parse-errors 0 aia-drops-no-session 0 aia-drops-bad-orealm 0 aia-drops-bad-ohost 0 aia-drops-no-result 0 aia-drops-other 0 aia-bad-result 0 aia-bad-data 0 rx-unsupported-resp-cmd 0 rx-bad-experimental-result 0 rx-bad-authentication-info 0 rx-bad-utran-vector 0 rx-bad-eutran-vector 0 rx-bad-geran-vector 0 rx-parse-errors 0 S6a diameter event counters: Diameter event Value bad data message 0 good data message 0 bad flags 0 bad fixed destination 0 bad routed destination 0 tx is over limit 0 bad end-to-end id 0 no peer for tx 0 peer down while waiting for answer 0 timeout while waiting for answer 0 tx timeout 0 tx try limit 0 tx failure 0 discarded 0 received answer is over limit 0 tx failure: no memory 0 base-app-tx-timeout 0 base-app-rx-timeout 0 base-app-tx-discard 0 base-app-rx-discard 0
Release Information
Command introduced in Junos OS Release 19.3R1.