close

keyboard_arrow_left

Table of Contents Expand all

list Table of Contents

English

operating-mode

date_range 20-Nov-23

Syntax

content_copy zoom_out_map
operating-mode mode;

[edit interfaces at-fpc/pic/port dsl-options]

For J Series Services Routers only, modify the operating mode of the digital subscriber line for an ATM interface.

mode—Operating mode for ATM-over-ADSL interfaces. The mode can be one of the following:

adsl2plus—Set the ADSL line to train in the ITU G.992.5 mode.
ansi-dmt—Set the ADSL line to train in the ANSI T1.413 Issue 2 mode.
auto—Set the ADSL line to autonegotiate the setting to match the setting of the DSL access multiplexer (DSLAM) located at the central office. The ADSL line trains in the ANSI T1.413 Issue 2 (ansi-dmt) or ITU G.992.1 (itu-dmt) mode.
etsi—Set the ADSL line to train in the ETSI TS 101 388 V1.3.1 mode.
itu-annexb-ur2—Set the ADSL line to train in the ITU G.992.1 UR-2 mode.
itu-annexb-non-ur2—Set the ADSL line to train in the ITU G.992.1 non-UR-2 mode.
itu-dmt—Set the ADSL line to train in the ITU G.992.1 mode.
itu-dmt-bis—Set the ADSL line to train in the ITU G.992.3 mode.

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Statement introduced before Junos OS Release 7.4.

Helped me install or use the product
Accelerated my deployment

Discuss the product with a co-worker
Make a purchase inquiry