handover-group
Syntax
handover-group group-name;
Hierarchy Level
[edit security gtp profile profile-name]
Description
A GPRS tunneling protocol (GTP) handover group is a set of SGSNs or serving gateway (SGW) with a common address-book library. You can configure a GTP profile and associate an GTP handover group to the GTP profile. When a GTP handover group name is referenced by a GTP profile, the device checks to see if the current SGSN/SGW address and the proposed SGSN/SGW address are both contained within the same GTP handover group. If both SGSN/SGW addresses are contained within the same GTP handover group, then the handover is allowed. If both the current and proposed SGSN/SGW addresses are not within the same GTP handover group, then the profile for the default handover group is used.
From Junos OS Release 20.4R1 onwards, the [edit security gprs gtp profile
profile-name] hierarchy level is replaced by
[edit security gtp profile
profile-name].
Options
| name | To specify the handover group on the GTP profile. |
| address-book | To specify the common address-book name. |
| address-set | To specify the address set for the handover group. |
The remaining statements are explained separately. See CLI Explorer.
Required Privilege Level
security—To view this statement in the configuration.
Release Information
Statement introduced in Junos OS Release 17.4R1.