show system reboot
Syntax
show system reboot <both-routing-engines>
Syntax (EX Series and MX Series)
show system reboot <all-members> <both-routing-engines> <local> <member member-id>
Syntax (TX Matrix Router)
show system reboot <all-chassis | all-lcc | lcc number | scc> <both-routing-engines>
Syntax (TX Matrix Plus Router)
show system reboot <all-chassis| all-lcc | lcc number | sfc number> <both-routing-engines>
Syntax (QFX Series and OCX Series)
show system reboot <both-routing-engines> <infrastructure name> <interconnect-device name> <node-device name>
Syntax (Junos OS Evolved)
show system reboot
Description
Display pending system reboots or halts.
Options
| none | Display pending reboots or halts on the active Routing Engine. For Junos OS Evolved,
the |
| all-chassis | (TX Matrix routers and TX Matrix Plus routers only) (Optional) On a TX Matrix router, display halt or reboot request information for all the T640 routers in the chassis that are connected to the TX Matrix router. On a TX Matrix router, display halt or reboot request information for all the T1600 or T4000 routers in the chassis that are connected to the TX Matrix Plus router. |
| all-members | (EX4200 switches and MX Series routers only) (Optional) Display halt or reboot request information for all members of the Virtual Chassis configuration. |
| all-lcc | (TX Matrix routers and TX Matrix Plus router only) (Optional) On a TX Matrix router, display system halt or reboot request information for all T640 routers connected to the TX Matrix router. On a TX Matrix Plus router, display halt or reboot request information for all connected T1600 or T4000 LCCs. |
| both-routing-engines | (Systems with multiple Routing Engines) (Optional) Display halt or reboot request information on both Routing Engines. Note:
Junos OS Evolved does not support the both-routing-engines option. |
| infrastructure name | (QFabric systems only) (Optional) Display reboot request information on the fabric manager Routing Engines and fabric control Routing Engines. |
| interconnect-device name | (QFabric systems only) (Optional) Display reboot request information on the Interconnect device. |
| lcc number | (TX Matrix routers and TX Matrix Plus routers only) (Optional) On a TX Matrix router, display halt or reboot request information for a specific T640 router that is connected to the TX Matrix router. On a TX Matrix Plus router, display halt or reboot request information for a specific router that is connected to the TX Matrix Plus router. Replace number with the following values depending on the LCC configuration:
|
| local | (EX4200 switches and MX Series routers only) (Optional) Display halt or reboot request information for the local Virtual Chassis member. |
| member member-id | (EX4200 switches and MX Series routers only) (Optional)
Display halt or reboot request information for the specified member
of the Virtual Chassis configuration. For EX4200 switches, replace |
| node-group name | (QFabric systems only) (Optional) Display reboot request information on the Node group. |
| scc | (TX Matrix router only) (Optional) Display halt or reboot request information for the TX Matrix router (or switch-card chassis). |
| sfc | (TX Matrix Plus router only) (Optional) Display halt or reboot request information for the TX Matrix Plus router. |
Additional Information
By default, when you issue the show system reboot command on a TX Matrix or TX Matrix Plus
primary Routing Engine, the command is broadcast to all the T640 (in
a routing matrix based on the TX Matrix router) or T1600 (in a routing
matrix based on the TX Matrix Plus router) primary Routing Engines
connected to it. Likewise, if you issue the same command on the TX
Matrix or TX Matrix Plus backup Routing Engine, the command is broadcast
to all the T640 (in a routing matrix based on the TX Matrix router)
or T1600 (in a routing matrix based on the TX Matrix Plus router)
backup Routing Engines that are connected to it.
For Junos OS Evolved,
the show system reboot command is applicable to all nodes
(Routing Engines and FPCs). There is no system reboot command for
a specific Routing Engine. Hence, the show system reboot command shows the pending reboot for the system and not for a specific
Routing Engine.
Required Privilege Level
maintenance
Sample Output
- show system reboot
- show system reboot all-lcc (TX Matrix Router)
- show system reboot sfc (TX Matrix Plus Router)
- show system reboot (QFX3500 Switch)
show system reboot
user@host> show system reboot reboot requested by root at Wed Feb 10 17:40:46 1999 [process id 17885]
show system reboot all-lcc (TX Matrix Router)
user@host> show system reboot all-lcc lcc0-re0: -------------------------------------------------------------------------- No shutdown/reboot scheduled. lcc2-re0: -------------------------------------------------------------------------- No shutdown/reboot scheduled.
show system reboot sfc (TX Matrix Plus Router)
user@host> show system sfc 0 No shutdown/reboot scheduled.
show system reboot (QFX3500 Switch)
user@switch> show system reboot No shutdown/reboot scheduled.
Release Information
Command introduced before Junos OS Release 7.4.
sfc option introduced for the TX Matrix Plus router
in Junos OS Release 9.6.