link-mode
Syntax
link-mode mode;
Hierarchy Level
[edit interfaces interface-name ether-options]
Description
Set the device’s link-connection characteristic.
Some QFX Series switch interfaces are full-duplex only. In such cases, the CLI shows only “link-mode full-duplex” or does not include the “link-mode” statement at all. You cannot configure the link mode on these interfaces; it is set to the full-duplex default.
Default
The full-duplex mode is enabled.
Options
mode —Link characteristic:
full-duplex—Connection is full duplex.
half-duplex—Connection is half duplex.
automatic—Link mode is negotiated.
If no-auto-negotiation is specified in the ether-options option, you can select only full-duplex or half-duplex. If auto-negotiation is specified in the ether-options option, you can select any mode.
Required Privilege Level
interface—To view this statement in the configuration.interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 11.1.