Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

header-navigation
keyboard_arrow_up
close
keyboard_arrow_left
Junos CLI Reference
Table of Contents Expand all
list Table of Contents
file_download PDF
{ "lLangCode": "en", "lName": "English", "lCountryCode": "us", "transcode": "en_US" }
English
keyboard_arrow_right

no-revert (Neighbor Interface)

date_range 20-Nov-23

Syntax

content_copy zoom_out_map
no-revert;

Hierarchy Level

content_copy zoom_out_map
[edit protocols l2circuit neighbor address interfaces interface-name],
[edit logical-systems logical-system-name protocols l2circuit neighbor address interfaces interface-name]

Description

(Optional) Prevent the protect interface from reverting to the primary interface.

Note:

The protect interface must be configured prior to configuring the no-revert statement.

Typically, when the primary interface goes down, the pseudowire starts using the protect interface. By default, when the primary interface comes back online, the interface is switched-over back from the protect interface to the primary interface. To prevent the switchover back to the primary interface, unless the protect interface goes down, include the no-revert statement. This prevents loss of traffic during the switchover.

Note:

If the protect interface fails, the interface is switched-over back to the primary interface, irrespective of whether or not the no-revert statement is included in the configuration.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS Release 11.3.

footer-navigation