lsp-cleanup-timer
Syntax
lsp-cleanup-timer seconds;
Hierarchy Level
[edit protocols pcep pce pce-id] [edit protocols pcep pce-group group-id]
Description
Specify the amount of time (in seconds) that the Path Computation Client (PCC) must wait before deleting any non-delegated Path Computation Element (PCE)-initiated LSPs from the failed PCE after a PCEP session terminates.
In compliance with draft-ietf-pce-stateful-pce-09, revoking of PCE-initiated LSP delegations by a PCC happens in a
make-before-break fashion before the LSPs are redelegated to an alternate
PCE. Starting in Junos OS Release 18.1R1, the lsp-cleanup-timer must be greater than or equal to the delegation-cleanup-timeout for the PCC to revoke the LSP delegations. If not, the redelegation
timeout interval for the PCC can be set to infinity, where the LSP
delegations to that PCE remain intact until specific action is taken
by the PCC to change the parameters set by the PCE.
Options
seconds |
Time (in seconds) that the PCC must wait before deleting any non-delegated PCE-initiated LSPs from the failed PCE after a PCEP session terminates. Non-delegated PCE-initiated LSPs are deleted immediately. |
Range: 0 through 2147483647 seconds
Default: 60
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 13.3.