show vmhost control-plane
Syntax
show vmhost control-plane
Description
Display the status of the JCP, JDM, Layer 2 dataplane, Layer 3 dataplane, and LTE.
Required Privilege Level
view
Sample Output
Note:
Starting in Junos OS Release 22.1R1, the output of the show vmhost
control-plane command is enhanced to display the following
information:
-
Any system component that is currently offline. If you disabled a system component in the currently active custom mode configuration, then the status of that component is displayed as OFFLINE.
-
Status and state of the NFV backplane
- show vmhost control-plane (NFX150)
- show vmhost control-plane (NFX250 (NG))
- show vmhost control-plane (NFX350)
show vmhost control-plane (NFX150)
user@host> show vmhost control-plane Vmhost Control Plane Information --------------------------------- Name | State | Status --------------------------------------------------------- Junos Control Plane RUNNING OK Juniper Device Manager RUNNING OK Layer 2 Infrastructure NOT_RUNNING OFFLINE Layer 3 Infrastructure RUNNING OK NFV Backplane RUNNING OK
show vmhost control-plane (NFX250 (NG))
user@host> show vmhost control-plane Vmhost Control Plane Information --------------------------------- Name | State | Status --------------------------------------------------------- Junos Control Plane RUNNING OK Juniper Device Manager RUNNING OK Layer 2 Infrastructure RUNNING OK Layer 3 Infrastructure RUNNING OK NFV Backplane RUNNING OK
show vmhost control-plane (NFX350)
user@host> show vmhost control-planeVmhost Control Plane Information --------------------------------- Name | State | Status --------------------------------------------------------- Junos Control Plane RUNNING OK Juniper Device Manager RUNNING OK Layer 2 Infrastructure RUNNING OK Layer 3 Infrastructure RUNNING OK NFV Backplane RUNNING OK
Release Information
Command introduced in Junos OS Release 18.1R1.